• FC-4G to SATA-II single controller RAID subsystem
• RAID5 configuration end-to-end I/O performance
  • Sequential read:545 MB/sec
  • Sequential write:345 MB/sec
• Dual-speed fans to reduce noise
• 2U chassis providing up to 6TB of storge capacity
• SATA NCQ support

• Multiple arrays configurable with dedicated or global hot spares
• RAID levels supported: RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
• Online expansion by:
  • Adding new drives
  • Copying and replacing drives with drives of larger capacity
• Automatic background rebuilds
• Configurable stripe size and write policy per array
• Intelligent drive handling:
  • In degraded mode: skips irreparable blocks to continue rebuild
  • In normal operation: data-block verification and repair

Infortrend Smart Technologies
Derived from more than ten years experience in RAID storage design, Infortrend's innovative firmware delivers Smart technologies that provide enhanced storage solutions for every customer environment, from small organizations to large enterprises. These technologies enhance I/O processing, drive handling, and system management.

IOSmart
IOSmart allows for the flexible configuration of logical drives, logical volumes and logical partitions and ensures instant RAID availability via background logical drive initialization. Fibre loops' load balancing is provided within the subsystem. The firmware's embedded intelligent algorithms, such as Adaptive Write Policy and Guaranteed Latency I/O, improve sequential write performance and ensure the fast and continuous flow of data.

DrvSmart
The DrvSmart utility provides an easy way to store data while keeping it safe. One of the main DrvSmart functions, Media Scan, retrieves data from degraded or damaged hard drives and handles low quality drives in both the degraded mode and during the rebuild process. Other DrvSmart features include disk cloning, drive roaming, SMART, transparent resetting of non-responsive hard drives, and RAID parity update tracking and recovery.

SysSmart
In addition to RAID protection for the disk drives, Infortrend has introduced Auto Data Protection Mechanisms. These special SysSmart firmware functions ensure data safety by automatically switching to write-through data caching when abnormal subsystem conditions are detected such as a PSU/cooling module failure, low BBU or UPS battery charge, etc.

By using the firmware to monitor and control the enclosure's dual-speed fans, the fan rotation speed is raised to a higher level when critical conditions are detected, e.g., a PSU or fan failure. Fan speed returns to the lower setting when normal operating status is restored.
The Eonstor can be monitored by variety of utilities and approaches. I2C internal serial bus, SAF-TE, and SES are seamlessly integrated into the comprehensive Java-based GUI RAIDWatch Manager. Component status, voltage and temperature readings, and system events are instantly revealed through the manager's graphical interface.

• Single controller configuration provides full RAID functionalities
• One (1) EonStor enhanced 2U enclosure
• One (1) RAID controller module
• One (1) 256MB DDR RAM DIMM module (pre-installed on the controller module)
• Two (2), hot-swappable, redundant, 350W power supply units
• Three (A12F) or Two (A08F), hot-swappable, redundant, single-fan cooling modules running in high/low speeds
• Twelve (12) or eight (8), hot-swappable drive trays
• Two (2) front handles
• Optional battery backup unit
  

• LUN Masking access control over terminal emulation or GUI manager, configurable filter entry variables
• Up to 1024 LUNs supported

• Front LCD control panel for setup and configuration
• 10/100 BaseT Ethernet for out-of-band management
• One (1) RS-232C serial port for local access to firmware-embedded utility
• Firmware-embedded Java-based RAIDWatch® GUI manager:
  • VT-100 terminal emulation via RS-232C
  • Telnet access via onboard Ethernet port
  • Cross-platform, remote administration with SSL
  • Out-of-band access via Ethernet
  • Centralized management to monitor and administer multiple RAID units on one screen
• Configuration client for real-time event notification over Email, Fax, LAN broadcast, SNMP Traps, MSN messenger,SMS short messages, and the configuration utility screen
• SNMP agent support:
  • SNMP trap event notification with plain-text event message (no MIB file required)
  • SNMP V2.0 MIB file support with get-and-set commands

• Twelve (12) or Eight (8) hot-swappable 3Gbps SATA-II drive trays that accommodate 1-inch pitch, 3.5-inch SATA-II or SATA-I disk drives
• Automatic bad-sector reassignment
• Dedicated bandwidth to each connected drive

• Two (2) FC-4G through two (2) SFP host ports
• Concurrent I/O commands
• Tagged command queuing up to 256
• Variable stripe size per logical drive
• Optimization setting for random or sequential I/Os

2 redundant, hot-swappable power supplies with PFC

Input 100VAC at 6A, 240VAC at 3A with PFC (auto-switching) 47 ~ 63Hz

Output (Maximum output: 350 Watts) +12.0V 25A max. + 5.0V 25A max. + 3.3V 20A max.

• Chassis without handles: 446(W) x 88(H) x 490(D) mm
• Chassis with handles: 482 (W) x 88(H) x 505(D) mm
• Package: 381H x567W x 772D mm

• Net weight: 23.5kg
• Gross weight: 25kg